Documentation Installation Environment & Unpacking
Installation environment
- Install indoors, away from direct sunlight.
- Choose a location with little dust, oil mist, salt or metal particles.
- Ambient temperature 0–45 °C, humidity 20–80% (non-condensing).
- Keep away from flammable or corrosive liquids and gases.
- No strong shocks or vibration (vibration acceleration 4.9 m/s² (0.5 G) or less).
- Keep away from strong magnetic fields and electrical noise sources (e.g. TIG welders).
- Altitude 1,000 m or less.
If you plan to use the system in other conditions, please consult HumansX in advance.
Unpacking
- Turn the three latches on the side of the flight case counterclockwise to release them.
- Open the door, release the hook-and-loop straps holding the unloading ramp and lower it. Always work with at least two people, one holding the ramp.
- Remove the fixing foam blocks (1–3) in order. Foam block 2 may contain cables and other accessories.
- Turn the leveling feet at the four corners of the base counterclockwise until they clear the floor; the unit can then be moved.
- With at least two people supporting the unit, roll it out of the case.
Package contents
| Item | Notes |
|---|---|
| Dual-arm robot (with covers and head cameras) | Standard |
| Teleoperation kit (VR headset, storage case) | Standard |
| Wrist cameras | Standard |
| Gripper | Standard (replaced by hands in multi-finger configurations) |
| Integrated electrical box, power cable, emergency stop button | Standard |
| USB–LAN hub, industrial LAN cable, USB drive | Standard |
If you find external damage, missing items or a wrong model, contact HumansX promptly after receipt with photos.
Before first use: confirm that the robot is in its zero (home) pose. If it is not, do not operate it and contact us.